Oce ColorWave 500, Руководство по эксплуатации

Страница: 231 / 330

Make a copy of an original with highlighted colors
Introduction
When you have an original on which colors are accentuated or highlighted, it can be difficult to
make a good copy on which the highlighting is still visible. The Océ ColorWave 500 has a special
setting [Color highlighting], that highlights the color accents of the original in black and white or
color. The copy has the same accents and quality as the colored original.
NOTE
• When the [Color mode] is set to [Color], color highlighting will make the colors more
saturated.
• When the [Color mode] is set to [Grayscale], colors will be copied darker than the grayscale
information on the original.
• The setting is disabled for the original types, [Photo], [Artwork], [Blueprint].
Procedure
1. Feed the original face up and centered on the original feeding table.
2. Tap the copy tile. A window with a list of presets opens.
3. Tap [Show all settings]. A list with settings opens.
4. Tap [Image] under the [Image] preset.
5. Tap [Color highlighting].
6.
Select [On] and tap [OK].
7.
Define the number of copies and tap the green button.
Make a copy of an original with highlighted colors
Chapter 4 - Use the Printing System 231