E-2
AFP-400 Installation
PN 50253:A2 03/12/96
Operating Modes, continued
Local Monitor Mode
(LocM)
Functions:
Read Status, Alter Status, and Control Functions
See Table E-2, LocM Functions.
Passwords
:
User-defined password for Alter Status and Control
Functions
Features
:
Password security feature for Control Functions eliminates
the need for mounting the CRT-2 in an enclosure.
Use with UL EDP-listed terminals, including personal
computers with Notifier Verifier software or terminal emula-
tion software. Intended for terminals connected through
modems, including FSK modems connected through a
public switched telephone network.
Functions:
Read Status only. See Table E-3, RemM Functions.
Passwords:
None
Features:
Functions
Lets you...
Read Status
Display the status of an individual point (Detector,
Module, Panel Circuit, or Zone).
Display a list of all the points in alarm or trouble.
Display a list of all programmed points in the
system.
Step through the history buffer event by event.
Display the entire history buffer.
Alter Status
N/A
Control
Functions
N/A
Table E-3 RemM Functions
Remote Monitor Mode
(RemM)
Function
Lets you...
Read Status
Display the status of an individual point (Detector,
Module, Panel Circuit, or Zone)
Display a list of all the points in alarm or trouble.
Display a list of all programmed points in the system
Step through the history buffer event by event
Display the entire history buffer
Alter Status
Disable/Enable an individual point
Change the sensitivity of a detector
Clear the verification counter of all detectors
Clear the entire history buffer
Set the AWACS alert and action levels
Control
Functions
Acknowledge
Signal Silence
System Reset
Drill
Table E-2 LocM Functions
