E-8
AFP-400 Installation
PN 50253:A2 03/12/96
Using the CRT-2 for Alter Status, continued
From the Alter Status menu, select
Disable
, option 1.
Disable
lets you
enable or disable detectors, modules, panel circuits, or zones.
Example: Disable Detector address 01 on loop #1.
1
ENTER
Enter the following:
1) Enter the first letter to read one of the following:
D
etector
M
odule
P
anel Circuit
Z
one
2) Enter the address or number of the device.
3) Press <Enter> and a display similar to the following will appear.
Press...
Disable/Enable. Type D(nnn) / M(nnn) / P(nn) / Z(nn) then Enter
STATUS CHANGE Dis/Ena point 08:29A Wed 08/
02/95
D 1 0 1
ENTER
Address
Number
(
nnn
)
Address
Loop number
4) Press <E> to Enable or press <D> to Disable; then press <Enter>.
ENTER
E
D
or
Device now disabled
TROUBL SMOKE(PHOTO) DETECTOR ADDR 101 Z03 DEVICE DISABLED 08:29A Wed 08/02/95 D101
D101 Now Enabled, Enter E(Enable) / D(Disable) or Esc. to Abort
Enable or disable detectors,
modules, or panel circuits
