Notifier AFP-400, Руководство по установке

Страница: 18 / 179

AFP-400 Installation
PN 50253:A2 03/12/96
1-11
The following lists the annunciators used with the AFP-400 system. For
detailed wiring requirements, refer to the appropriate Annunciator manuals.
System Components
The Annunciator Control Module-16AT or AFM-16AT contains 16 red alarm
and 16 yellow trouble LEDs, a system trouble LED, an ON LINE/POWER
LED, and a local piezo sounder with switches for control panel ACKNOWL-
EDGE, SILENCE, RESET, and DRILL.
The Annunciator Control Module-32A/AFM-32A contains 32 red alarm LEDs,
a system trouble LED, an ON LINE/POWER LED, and a local piezo sounder
with a silence/acknowledge switch. The AFM-32A is fixed at address “1,” and
will not accept expanders.
Module Function
AEM-32A – Annunciator
Expander Module-32A
• Expands the ACM-32A by 32 system points.
• Supports one expander module, providing a
maximum of 64 points.
ACM-8R – Annunciator
Control Module-8R
• Provides eight Form-C relays with 5 A contacts.
• Use to track any group of eight zones within the
system.
The LDM-32 Lamp Driver Annunciator Module provides 32 alarm lamp driver
outputs for connection to a custom graphic annunciator. You can also set
the LDM-32 with a DIP switch for 16 alarm, 16 trouble and 16 switch inputs
for control of such system functions as Signal Silence and System Reset.
Annunciators
ACM-16AT/AFM-16AT
ACM-32A/AFM-32A
Lamp Driver Annunciator
Module – LDM-32
Module Function
LDM-E32 – Lamp Driver
Annunciator Expander
Module LDM-E32
Expands the LDM-32 by 32 system points, to a
maximum of 64 points.
LDM-R32 – Relay Expander
Module LDM-R32
Provides the LDM-32 or LDM-E32 with 32 dry
Form-A (normally open) contacts.
Module Function
Annunciator Expander
Module (AEM-16AT)
• Expand the ACM-16AT by 16 system points.
• Supports up to three expanders, providing a
maximum of 64 annunciator points.
Annunciator Fixed
Module-16A (AFM-16AT)
• Use in systems that require 16 annunciation
points or less.
• Use multiple annunciators by setting all
annunciators to “Receive Only,” except the last
AFM-16A in line.
• Each annunciator's address is internally fixed at
“1” and will not accept expanders.