NorthStar 961X Скачать руководство пользователя

Страница: 295 / 374

Chapter 13 - Customizing Setup Functions

961 Operations and Reference Manual Rev. D

Page 13-33

Loading marked BSB charts

To mark and load

individual

charts from the source CD:

1. Press the

STAR

key to display the

SETUP MENU

screen,

then press the

CHART INVENTORY

key.

2. Press the

LOAD/UPDATE CHARTS

key.

3. At the

CHARTS IN DATABASE

screen, press the

LOAD

CHARTS

key.

4. At the

SELECT CHART SOURCE

screen, press the

CUR-

SOR PAD

to highlight the CD-ROM drive, then press the

LIST CHARTS

key.

5. At the

CHARTS ON DISK

screen, press the

CURSOR PAD

to highlight the desired chart.

6. To mark a chart

LOAD,

press the

OPTION

key; to mark a

chart

DON’T LOAD

, press the

OPTION

key again.

7. Press the

LOAD CHARTS

key, and the

LOADING CHARTS

dialog box appears. To load charts marked

LOAD

into the

database, press the

LOAD MARKED CHARTS

key (or to

cancel, press the

CANCEL

key). If the CD and the chart

database have duplicate file names, you’ll have three
options to choose from:

To ensure that the chart database contains the chart(s)
with the most recent file date, press the

NEWEST VER-

SION

key.

To always replace chart(s) already in the database, press
the

ALWAYS OVERWRITE

key.

To never replace chart(s) already in the database, press
the

NEVER OVERWRITE

key.

8. Press the desired key to start loading the charts (or press

CANCEL

to return to the

CHARTS ON DISK

screen).

After loading, the

LOADING CHARTS

dialog box provides

a summary of the total number of charts loaded.

9. Press

CONFIRM

to go back to the

CHARTS ON DISK

screen.

Содержание 961X























































































































































































































































































































































































Результаты поиска

Содержание 961X

Отзывы:

Похожие инструкции для 961X

Бренды по названию

Популярные бренды

NorthStar 961X, Руководство по эксплуатации и справочник

Результаты поиска

Содержание 961X

Отзывы:

Похожие инструкции для 961X

Бренды по названию

Популярные бренды