NorthStar 961X, Руководство по эксплуатации и справочник

Страница: 195 / 374

Chapter 8 - Creating Routes
961 Operations and Reference Manual Rev. D Page 8-23
4. Press the
CURSOR
menu key, then press the
STORE AS
WAYPT/ROUTE
key.
5. If desired, enter a name for the new waypoint; otherwise,
the 961 defaults to a name starting sequentially as
W0000
.
6. Press the
ADD TO END OF ROUTE
key.
The 961 returns to the CHART screen, showing a con-
necting route leg from the old end point to the new end
point.
7. To add any additional waypoints to the end of the route,
repeat step #3 through step #6.
Adding named waypoints to the end of a displayed route
First, on the
ROUTES
screen, remember to press the
CURSOR
PAD
up or down to select the desired route. To display the
route on the
CHART
screen, press the
ON CHART
key, then
press the
CHART
key.
1. At the
CHART
screen, press the
CURSOR PAD
to select
the named waypoint you want to add to the route. Note
that you may have to use the
LEFT ARROW
or
RIGHT
ARROW
key to select a named waypoint.
2. At the
SELECTED WAYPOINT
dialog box, press the
ADD
TO END OF ROUTE
key.
The 961 returns to the CHART screen.
Graphically deleting route waypoints
To permanently delete waypoints from a route (but not from
the 961’s database of waypoints):
1. On the
ROUTES
screen, press the
CURSOR PAD
up or
down to select the desired route.
2. To display the route on the
CHART
screen, press the
ON
CHART
key, then press the
CHART
key.
3. On the
CHART
screen, press the
CURSOR PAD
to select
the route point you want to delete. Note that you must
use the
LEFT ARROW
key or
RIGHT ARROW
key to
select, for example,
ROUTE POINT 6
, not just
WAYPOINT