NorthStar 961X Скачать руководство пользователя

Страница: 194 / 374

Chapter 8 - Creating Routes

Page 8-22

961 Operations and Reference Manual Rev. D

6. Press the

CURSOR PAD

to move the waypoint to the

desired location, then press the

DONE

key (or press

CAN-

CEL

to leave the waypoint unchanged).

The 961 shows the location of the moved route waypoint.

Graphically adding waypoints to a route leg

1. On the

ROUTES

screen, press the

CURSOR PAD

up or

down to select the desired route.

2. To display the route on the

CHART

screen, press the

CHART

key, then press the

CHART

key.

3. At the

CHART

screen, press the

CURSOR PAD

to select

the desired leg of the route.

The name of the selected route and the particular leg
must appear in the

CURSOR INFO BAR

at the bottom of

the screen; to highlight the route leg, you may have to
press the

LEFT ARROW

and

RIGHT ARROW

keys.

4. Press the

CURSOR

menu key, then press the

EDIT

key.

5. Press the

CURSOR

PAD

to move the cursor to the desired

location. If desired, you may select a named waypoint.

As you move the cursor, a light gray line indicates the
location of the new legs to and from the new waypoint.

6. To insert the new waypoint at the cursor position, press

the

DONE

key.

The 961 returns to the

CHART

screen, showing the route

leg’s new unnamed point

(

called

POINT X

in the

CUR-

SOR

INFO BAR)

7. To add waypoints to the same route leg or different route

legs, repeat steps #3 through #6.

Graphically adding waypoints to the end of a route

1. On the

ROUTES

screen, press the

CURSOR PAD

up or

down to select the desired route.

2. To display the route on the

CHART

screen, press the

CHART

key, then press the

CHART

key.

3. Press the

CURSOR PAD

to move the cursor to the posi-

tion where you want to store the route’s new end point.

Содержание 961X























































































































































































































































































































































































Результаты поиска

Содержание 961X

Отзывы:

Похожие инструкции для 961X

Бренды по названию

Популярные бренды

NorthStar 961X, Руководство по эксплуатации и справочник

Результаты поиска

Содержание 961X

Отзывы:

Похожие инструкции для 961X

Бренды по названию

Популярные бренды