Nord Drivesystems SK 200E Series, Руководство пользователя

Страница: 163 / 265

6 Parameterisation
BU 0200 GB Subject to technical alterations 163
Parameter
{Factory setting}
Setting value / Description / Note Device Supervisor
Parameter
set
P402
[-01]
...
[-06]
Analog input adjustment: 0%
S
-50.00 ... 50.00 V
{ all 0.00 }
[-01] = Ext ernal analog in put 1 , AIN1 of the first I/O extension (SK xU4-IOE).
[-02] = Ext ernal analog in put 2
, AIN1 of the first I/O extension (SK xU4-IOE).
[-03] = Ext ernal a nalog i nput 1 2nd IOE , AIN1 of the second I/O extension
(SK xU4-IOE) (= analog input 3).
[-04] = Ext ernal a nalog i nput 2 2nd IOE , AIN1 of the second I/O extension
(SK xU4-IOE) (= analog input 4).
[-05] = reserved
[-06] = reserved
... only with
SK CU4-IOE or
SK TU4-IOE This parameter sets the voltage which should correspond with the minimum value of the
selected function for the analog input 1 or 2. In the factory setting (setpoint) this value is
equivalent to the setpoint set via P104 >Minimum frequency<.
Note:
Standardisation of typical signals such as 0(2)-10V or 0(4)-20mA is carried out via the DIP
switches on the I/O-extension module. An additional adjustment of parameters (P402) and
(P403) is not made in this case.
P403
[- 01]
...
[- 06]
Analog input adjustment: 100%
S
-50.00 ... 50.00 V
{ all 10.00 }
[-01] = Ext ernal analog in put 1 , AIN1 of the first I/O extension (SK xU4-IOE).
[-02] = Ext ernal analog in put 2 , AIN1 of the first I/O extension (SK xU4-IOE).
[-03] = Ext ernal a nalog i nput 1 2nd IOE , AIN1 of the second I/O extension
(SK xU4-IOE) (= analog input 3).
[-04] = Ext ernal a nalog i nput 2 2nd IOE , AIN1 of the second I/O extension
(SK xU4-IOE) (= analog input 4).
[-05] = reserved
[-06] = reserved
... only with
SK CU4-IOE or
SK TU4-IOE This parameter sets the voltage which should correspond with the maximum value of the
selected function for the analog input 1 or 2. In the factory setting (setpoint) this value is
corresponds with the setpoint set via P105 >Maximum frequency<.
Note:
Standardisation of typical signals such as 0(2)-10V or 0(4)-20mA is carried out via the DIP
switches on the I/O-extension module. An additional adjustment of parameters (P402) and
(P403) is not made in this case.