Nord Drivesystems SK 200E Series, Руководство пользователя

Страница: 194 / 265

NORDAC SK 200E Manual
194 Subject to technical alterations BU 0200 GB
Parameter Setting value / Description / Note Device Supervisor
Parameter
set
P739
[-01]
...
[-03]
Heat sink temperature
-40 ... 150 [-01] = FI heat sink temperature
[-02] = Ambient temperature (Internal temperature of the FI)
[-03] = Temp erature Motor KTY , motor temperature via KTY, recording only via IO extension,
setting in parameter (P400) to function {30} "Motor temperature"
P740
[-01]
...
[-13]
Process data Bus In
S
This parameter provides information about the actual control word (STW) and the setpoints
(SW1-3) that are transferred via the bus systems.
For values to be displayed, a bus system must be selected in P509.
For standardisation of actual values: See also (Section 9.10).
[-01] = Control word (P509) Control word, source from (P509).
[-02] = Setpoint 1 (P510-01) / (P546 [-01])
[-03] = Setpoint 2 (P510-01) / (P546 [-02])
[-04] = Setpoint 3 (P510-01) / (P546 [-03])
Setpoint data from main setpoint
(P510 [-01]).
[-05] = res ulting status of In Bit P480 The displayed value depicts all Bus In
Bit sources linked with
OR .
[-06] = Parameter data In 1
[-07] = Parameter data In 2
[-08] = Parameter data In 3
[-09] = Parameter data In 4
[-10] = Parameter data In 5
Data during parameter transfer:
Order label (AK),
Parameter number (PNU),
Index (IND),
Parameter value (PWE 1/2)
0000 ... FFFF
(hex)
[-11] = Setpoint 1 (P510-02)
[-12] = Setpoint 2 (P510-02)
[-13] = Setpoint 3 (P510-03)
Setpoint data from the master function
value (broadcast), if P509/510 = 4
(P502/P503)