Nord Drivesystems SK 200E Series, Руководство пользователя

Страница: 191 / 265

6 Parameterisation
BU 0200 GB Subject to technical alterations 191
Parameter Setting value / Description / Note Device Supervisor
Parameter
set
P709
[-01]
...
[-09]
Analog input voltage
-100.0 ... 100.0 % Displays the measured analog input value.
[-01] = Potentiometer 1
, internal FI potentiometer P1 (Section 5.1.3), for the adjustment
of “maximum frequency”, “minimum frequency” and “ramp time”
[-02] = Potentiometer 2 , internal FI potentiometer P2 (Section 5.1.3) with fixed steps, the
function can also be entered via the DIP switch.
[-03] = External analog input 1 , AIN1 of the first I/O extension (SK xU4-IOE).
[-04] = External analog input 2 , AIN2 of the first I/O extension (SK xU4-IOE).
[-05] = Setpoint module , in preparation
[-06] = Analog function digital input 2 , analog function of the FI digital input 2
[-07] = Analog function digital input 3 , analog function of the FI digital input 3
[-08] = External analog input 1 2nd IOE , AIN1 of the second I/O extension
(SK xU4-IOE) (= analog input 3).
[-09] = External analog input 2 2nd IOE , AIN2 of the second I/O extension
(SK xU4-IOE) (= analog input 4).
P710
[-01]
[-02]
Analog output volta ge
0.0 ... 10.0 V Displays the delivered value of analog output.
[-01] = First IOE, AOUT of the first I/O extension (SK xU4-IOE)
[-02] = Second IOE, AOUT of the second I/O extension (SK xU4-IOE)
P711 Digital output status
Shows the actual status of the digital outputs of the frequency inverter. 00 ... 11
(bin)
or
0 ... 3
(hex)
Bit 0 = Digital output 1
Bit 1 = Mechanical brake
P714 Operating time
0.00 ... ___ h This parameter shows the time for which the FI was connected to the mains and was ready for
operation.
P715 Running time
0.00 ... ___ h This parameter shows the time for which the FI was enabled and supplied current to the output.
P716 Current frequency
-400.0 ... 400.0 Hz Displays the actual output frequency.
P717 Current rotation speed
-9999 ... 9999 rpm Displays the actual motor speed calculated by the FI.
P718
[-01]
...
[-03]
Current set point freq uency
-400.0 ... 400.0 Hz Displays the frequency specified by the setpoint.
[-01] = Actual setpoint frequency from the setpoint source
[-02] = Actual setpoint frequency after processing in the FI status machine
[-03] = Actual setpoint frequency after the frequency ramp