218
Service Manual – SW5500, FLOORTEC R 985
42 - Sweep System, Main Broom
Skirt (Continues)
Rear Skirts Removal and Installation
26 Empty the hopper, because the weight of the waste inside the hopper can affect the skirt height check
27 Drive the machine on a level ground that is suitable for checking the skirt height
28 Turn the ignition key to “0”, then engage the parking brake
29 Remove the main broom (see
30 Lift the hopper to the end-of-stroke
WARNING: Place a safety rod under the lifted hopper.
31 Working inside the main broom compartment, unscrew the nuts (A) fastening the rear skirt (B)
32 Working from the hopper compartment, remove the rear skirt (B) and the strap (C)
33 If necessary, unscrew the nuts (D) on the recycling skirt (E) From the main broom compartment,
remove the strap (F) and the recycling skirt (E)
34 Install the rear skirts (B) and the recycling skirt
(E) and the other removed components in the reverse
order of removal, and note the following:
◦ Adjust in position until contact with the floor the rear skirt (B).
Note:
The recycling skirt (E) cannot be adjusted.
Figure 16:
B
E
B
A
C
D
D
E
F