172
Service Manual – SW5500, FLOORTEC R 985
29 - Engine System, LPG
Engine Oil Change
WARNING: The discharged engine oil must be disposed of properly according to the Law in force.
Note:
It is advisable to change the oil when the engine is still hot, to make the oil downflow easier.
1
Drive the machine on a level floor.
2 Turn the ignition key to “0”, then engage the
parking brake
3 Open the engine compartment hood with the
handle and fasten it with the support rod
4 Lift and remove the machine right side panel,
disengaging it from the upper and lower
fasteners
5 Remove the cap (A)
6 Unhook the drain hose (B) and bring it towards
the outside of the machine
7 Remove the drain plug (C) from the hose and
drain the oil into a suitable container, then refit
the oil drain plug and return the hose to its
initial location
8
Remove the filler cap (D) and pour in the new oil
through the filler until it reaches the upper limit
(E) of the cavity
Note:
As for engine oil type and quantity,
see
and the Honda
Engine Manual.
9
Reinstall the filler cap (D) and the cap (A) safely.
10 Perform in the reverse order steps 3 and 4
A
D
E
B
C
E
LPG VERSION
E
E
C
A
B
D
Figure 7:
