42
SI-Ethernet User Guide
Issue: 3
Controls and displays the default gateway of the module.
If DHCP is enabled this parameter becomes read-only, and until a default gateway is allocated to
the module will display 0.0.0.0.
If DHCP is disabled the module will initialize, on reset or power cycle, with the default gateway
stored for the parameter.
The module can use this IP address when it wishes to resolve the IP address for a domain name.
This parameter performs the same function as
Secondary DNS
(
S.02.010
), however the address
specified in this parameter will be tried first. Only when this address is unsuccessful will the
secondary DNS address be tried.
If DHCP is enabled this parameter becomes read-only, and until a primary DNS address is
allocated to the module will display 0.0.0.0.
If DHCP is disabled the module will initialize, on reset or power cycle, with the primary DNS
address stored for the parameter.
S.02.008
Default Gateway
Minimum
0
(Display: 0.0.0.0)
Maximum
4294967295
(Display:255.255.255.255)
Default
3232236030
(Display:192.168.1.254)
Units
None
Type
32 Bit User Save
Update Rate
DHCP enabled:
write on event;
DHCP disabled:
read on reset
Display Format
IP Address
Decimal Places
0
Coding
RW, BU
S.02.009
Primary DNS
Minimum
0
(Display: 0.0.0.0)
Maximum
4294967295
(Display:255.255.255.255)
Default
0
(Display: 0.0.0.0)
Units
None
Type
32 Bit User Save
Update Rate
DHCP enabled:
write on event;
DHCP disabled: read on reset
Display Format
IP Address
Decimal Places
0
Coding
RW, BU
Содержание Unidrive M600
Страница 1: ...User Guide SI Ethernet and Unidrive M Onboard Ethernet Part Number 0478 0137 03 Issue 3 ...
Страница 16: ...16 SI Ethernet User Guide Issue 3 Figure 4 3 Typical network topologies ...
Страница 215: ......
Страница 216: ...0478 0137 03 ...