![background image](http://html.mh-extra.com/html/nidec/unidrive-m600/unidrive-m600_user-manual_1687782100.webp)
100
SI-Ethernet User Guide
Issue: 3
This parameter is used to display the error code if an EtherNet/IP configuration error occurs.
This parameter shows the EtherNet/IP cyclic data transfer rate.
S.20.004
Configuration error
Minimum
0
(Display: No error)
Maximum
8
(Display: Out cons trig pr)
Default
None
Units
None
Type
8 Bit Volatile
Update Rate
Background
Display Format
None
Decimal Places
0
Coding
RO, Txt, ND, NC, PT, BU
Value
Text
Description
0
No error
No error
1
RPI event dst
RPI timeout event destination not valid
2
RPI event type
RPI timeout event type not valid
3
IDLE event dst
PLC IDLE event destination not valid
4
IDLE event type
PLC IDLE event type not valid
5
Input mapping
Input mapping parameter not valid
6
Output mapping
Output mapping parameter not valid
7
In cons trig pr
Input consistency trigger parameter not valid
8
Out cons trig pr
Output consistency trigger parameter not valid
S.20.007
Cyclic Data Transfers / s
Minimum
0
Maximum
65535
Default
None
Units
Messages/s
Type
16 Bit Volatile
Update Rate
Background
Display Format
None
Decimal Places
0
Coding
RO, ND, NC, PT, BU
Содержание Unidrive M600
Страница 1: ...User Guide SI Ethernet and Unidrive M Onboard Ethernet Part Number 0478 0137 03 Issue 3 ...
Страница 16: ...16 SI Ethernet User Guide Issue 3 Figure 4 3 Typical network topologies ...
Страница 215: ......
Страница 216: ...0478 0137 03 ...