SI-Ethernet User Guide
107
Issue: 3
Sa
fe
In
Me
ch
E
G
Par
amet
er
Key
an
PC T
Sec
Di
G
Ind
ex
This parameter specifies the parameter to use for triggering input assembly object consistency. See
In Consistency Enable
(
S.20.026
) for more information on consistency.
This parameter allows for enabling and disabling output assembly object consistency.
Writing of data can be controlled using consistency by enabling this parameter and setting a trigger
parameter (In
Out Consistency Trigger Param
(
S.20.029
).
Consistency enabled
When the output consistency is enabled, the value in
Out Consistency Trigger Param
(
S.20.029
) is
checked at the beginning of the writing routine. If it is zero then the PLC or EtherNet/IP master
output values are written to the cyclic data destination parameters and the trigger parameter is set
to one. If the output trigger parameter value is non-zero then the output values are not written to the
destination parameters.
Consistency disabled
When the output consistency is disabled, the output values are written to the cyclic data destination
parameters at the background task rate after it has been received.
S.20.027
In Consistency Trigger Param
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units
None
Type
32 Bit User Save
Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format
Slot Menu Param
Decimal Places
0
Coding
RW, BU
S.20.028
Out Consistency Enable
Minimum
0
(Display: Off)
Maximum
1
(Display: On)
Default
0
(Display: Off)
Units
None
Type
1 Bit User Save
Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format
None
Decimal Places
0
Coding
RW
If write consistency is enabled, then at reset or at power-up, the value in the trigger
parameter is set to one.
NOTE
Содержание Unidrive M600
Страница 1: ...User Guide SI Ethernet and Unidrive M Onboard Ethernet Part Number 0478 0137 03 Issue 3 ...
Страница 16: ...16 SI Ethernet User Guide Issue 3 Figure 4 3 Typical network topologies ...
Страница 215: ......
Страница 216: ...0478 0137 03 ...