38
SI-Ethernet User Guide
Issue: 3
When set, the Ethernet interface performs a warm reset. When the reset has been executed and
the Ethernet interface is performing it’s initialization routines this parameter will be cleared to zero.
If set to “On” when the module is reset, this parameter will cause the Ethernet interface to return to
it’s “Out of box configuration” and any settings changed will be returned to their default values. This
will include any web page customisations, e-mail settings, etc. Following the default the module will
set the parameter to “Off” and the module will reset.
Take care using this parameter as any configuration information will be irretrievably lost!
Value
Text
Description
-2
Bootldr - Update The bootloader is performing a flash update.
-1
Bootldr - Idle
The bootloader is idle.
0
Initializing
Module is currently initializing.
1
OK
Module has initialized and has found no errors.
2
Config
A configuration error has been detected.
3
Error
An error has occurred preventing the module from running
correctly.
S.00.007
Reset
Minimum
0 (Off)
Maximum
1 (On)
Default
0 (Off)
Units
None
Type
1 Bit Volatile
Update Rate
Read every 200 ms,
Written to 0 on module
initialization.
Display Format
Bit
Decimal Places
0
Coding
RW, NC
The drive, and any other modules installed to the drive, will not be affected by the reset.
S.00.008
Default
Minimum
0
(Display: Off)
Maximum
1
(Display: On)
Default
0
(Display: Off)
Units
None
Type
1 Bit Volatile
Update Rate
Read every 200 ms, Written
to 0 on module initialization.
Display Format
Bit
Decimal Places
0
Coding
RW, NC
NOTE
Содержание Unidrive M600
Страница 1: ...User Guide SI Ethernet and Unidrive M Onboard Ethernet Part Number 0478 0137 03 Issue 3 ...
Страница 16: ...16 SI Ethernet User Guide Issue 3 Figure 4 3 Typical network topologies ...
Страница 215: ......
Страница 216: ...0478 0137 03 ...