NF KP3000S, Инструкция по эксплуатации

Страница: 264 / 290

10.
Specifications
PROGRAMMABLE AC/DC POWER SOURCE 246
10.13 Current Limiter
This controls the output voltage for the output current to be within the limiter setting value when the
peak value or RMS exceeds it. The output can be configured to be turned off when the limited state
continues over the specified time.
In the polyphase system, the settings are made for the phase current and common to all the phases.
Peak current limiter
KP3000S
Positive
current
Setting Range
(Peak value)
+15.0 A to +126.0 A / +7.5 A to +63.0 A
Factory
default
+126.0 A / +63.0 A
Negative
current Setting Range
(Peak value)

126.0 A to

15.0 A /

63.0 A to

7.5 A
Factory
default

126.0 A /

63.0 A
Resolution 0.1 A
Limiter operation Select whether to recover automatically (continuous, factory default)
or turn the output off when the limited state continues over the
specified time (1 s to 10 s, resolution 1 s).
Note: When you set the number of units by the power unit energization setting to 1, the setting
range becomes half.
RMS current limiter
KP3000S
Setting range
(effective value)
1.5 A to 31.5 A / 1.5 A to 15.8 A
Factory default 31.5 A / 15.8 A
Resolution 0.1 A
Limiter operation Select whether to recover automatically (continuous, factory default) or
turn the output off when the limited state continues over the specified time
(1 s to 10 s, resolution 1 s).
Note: When you set the number of units by the power unit energization setting to 1, the setting
range becomes half.