NF KP3000S, Инструкция по эксплуатации

Страница: 259 / 290

10.6 DC Output
KP3000S
241
*11: For 40 Hz to 550 Hz, sine wave, the rated output voltage, the resistance load for the maximum
current at 55 Hz, and 55 Hz reference.
*12: Set for the L1 phase. The component of the phase angle setting is added for the other phases.
*13: In the case of 50 V or higher, sine wave, and same load condition and voltage setting for all
phases.
*14: In the case of the AC mode and 23°C

5°C.
10.6 DC Output
[V]=Vdc, [A]=Adc, the power input voltage is 200 V, and the polarity is relative to the Lo terminal,
unless otherwise noted.
KP3000S
Mode Floating output, the Lo terminal can be grounded.
Rated output voltage 100 V / 200 V
Voltage setting range

220.0 V to +220.0 V /

440.0 V to +440.0 V
Setting resolution 0.1 V
Voltage accuracy *15

(|0.5% of set| + 0.6 V / 1.2 V)
Maximum current *16 30 A /15 A
Maximum instantaneous
current *17
Peak value which is four times of the maximum current (Apk)
Power capacity 3 kW
*15: In the case of

212 V to

10 V, +10 V to +212 V/

424 V to

20 V, +20 V to +424 V, no load,
AC setting 0 V, 23°C

5°C.
*16: If the output voltage is higher than the rated value, this is limited (lowered) to satisfy the power
capacity. If there is the AC superimposition, the active current of DC+AC satisfies the
maximum current. In the case that the ambient temperature is 40°C or higher, the maximum
current may decrease.
*17: Instantaneous = within 2 ms, at the rated output voltage
10.7 Output Voltage Stability
KP3000S
Fluctuation with
input voltage
(Phase voltage)
*18
Within

0.15%
Fluctuation with
output current
(Phase voltage)
*19 DC
Within

0.15 V/

0.30 V
45 Hz to 65 Hz
Within

0.15 V/

0.30 V
40 Hz to 550 Hz
Within

0.5 V/

1.0 V
Fluctuation with
ambient
temperature
(Phase voltage)
*20
Within

0.01%/°C (typ.)
*18: For power input 90 V to 250 V, power input 200 V reference, the resistance load at the
maximum current, the rated output voltage, DC or 45 Hz to 65 Hz. Transition state