2. Preparation before Use
PROGRAMMABLE AC/DC POWER SOURCE
8
Do not install the product in the following places:
Place exposed to inflammable gas
This may pose a risk of explosion. Never install and use the product in such a place.
Outdoors, place exposed to direct sunlight, or place near fire or heat source
This may reduce the performance, or cause failure.
Place exposed to corrosive gas or water, or humid place
This may cause corrode or failure.
Place near electromagnetic field source, high-voltage equipment, or power line
This may cause malfunction.
Place of frequent vibration
This may cause malfunction or failure.
Dusty place
This may cause failure. Especially do not install the product in a place with conductive
dust.
This product may cause interference if used in residential areas. Such use must be avoided
unless the user takes special measures to reduce electromagnetic emissions to prevent
interference to the reception of radio and television broadcasts.
2.3
Cautions during Moving and Transportation
Follow the instructions below when moving or transporting this product.
Remove all wirings connected to this product.
Before removing the wiring, be sure to turn off this product to cut the power from the
distribution board. Otherwise, an electric shock might occur.
Check before movement and transportation
Check the weight before moving the product (Table 2-3).
Moving with casters
The casters attached to this product (caster type) or optional are intended for use to move the
product on a horizontal surface. To move the product on a sloped or uneven surface, licensed
personnel should move it by operating a lifting machine or crane instead of the casters.
As this product is heavy, whenever it is moved, at least two people are required to move it.
Move the Adjuster Foot (included within caster type) up enough from the floor by using a
spanner (19 mm diameter). You can move the Adjuster Foot up by turning it counterclockwise
as viewed from above.
WARNING
Содержание KP3000S
