NF KP3000S, Инструкция по эксплуатации

Страница: 25 / 290

2.2 About Installation Environment
KP3000S
7

Install the product on a sturdy place.
 The floor needs to have enough strength to support the weight of the product. The weight of
this product is shown in Table 2-3.
Table 2-3 Weight
Weight
KP3000S 50 kg approx.
 Do not install this product on a sloped surface. The Adjuster Foot (included within caster type)
is only for temporary fixing, and cannot support the unit's own weight. You also must not lean
on this product or use it as a support. How to use the Adjuster Foot is shown in Figure 2–1.
Up Down
Adjuster Foot
Figure 2-1 How to Use the Adjuster Foot (Caster Type)

About arrangement
 Do not place the product on its side, back or top.
 Do not stack the product on top of the other, or place it in front or back of the other
(arrangement which makes the cabinet placed behind inhale the exhaust heat of the other).
 When you use multiple cabinets to form a polyphase system, there is no limitation regarding
the order of the phases to be arranged. Arrange them in your convenient order within the range
of the length of the System Cable.

Other installation location conditions
 Use the product indoors, at altitude up to 2000 m.
 Use the product where the temperature is 0 to +50 degrees Celsius, and the humidity is 5 to
85%RH (the absolute humidity should be 1 to 25 g/m
3
, without condensation). However, on
some specifications, the temperature range limit is stricter.
The Adjuster Foot can be moved
up by turning it to left
(counterclockwise) as viewed from
above, and moved down by turning
it to right (clockwise). Move the
Adjuster Foot down by using a
spanner (19mm diameter).