NF KP3000S, Инструкция по эксплуатации

Страница: 279 / 290

10.33 Option
KP3000S
261
10.33 Option
Option name Description Remarks
Outlet
PA-001-1963
Two outlets of NEMA 5-15 (Japan/North
America type) are added to the front bottom
of KP3000S. (They can be used in the 100V
range.) On order
Casters
PA-001-1964
In this option casters with the freely
movable front-wheels and fixed
rear-wheels which can be used to move this
product in the horizontal location are
attached instead of feet.
Descriptions for the caster type in this
document applies when this option is
attached. After
purchase
Control Software for KP series
PA-001-1965
Program that supports form PC:
The same operations as performed on the
panel,
Editing/transferring/exporting the arbitrary
waveform data,
Data logging (importing the measured values),
Editing/exporting/performing Sequence,
Editing/exporting/performing Simulation. On order and
after purchase
System Cable (1P3W)
PA-001-1720 Allows you to configure the Single-phase
three-wire system by using two KP3000Ss. On order and
after purchase
System Cable (3P4W)
PA-001-1721 Allows you to configure the Three-phase
four-wire system by using three KP3000Ss. On order and
after purchase
Remote Controller
DP008 Multifunctional remote controller with
numeric keypad and jog shuttle. On order and
after purchase
Replacement Air Filter
PA-001-1966
Replacement Air Filter. On order and
after purchase
Rack-Mount Adapter
EIA (inch)
PA-001-1728
JIS (mm)
PA-001-1732
The rack-mount adapter is a set of brackets
used to mount the product on the EIA or JIS
standard compliant rack. Provided for each
cabinet size. On order and
after purchase
Additional Power Cable
100V AC input: PA-001-1973
200V AC input: PA-001-1974
When you need two or more cables, or when
you change the power supply environment,
and so on, you can purchase. It is
approximately 3m length. On order and
after purchase