NF KP3000S, Инструкция по эксплуатации

Страница: 29 / 290

2.4 Grounding and Power Connections
KP3000S
11
Voltage range: Single-phase 100 to 230 V
Frequency range: 50 Hz/60 Hz

About power input terminal
Table 2-4 Power Input Terminal
KP3000S
Screw M6

About power input cable
The power input cable supplied with this product varies in diameter in Table 2-5. A crimp-type
terminal is attached to each cable on the end which is to be connected to the input terminal of this
product.

On the supplied power input cable, the end which is to be connected to the distribution board
has no terminal attached. Use a crimp-type terminal appropriate for the terminal screw
diameter of the distribution board to connect the cable firmly.
 The supplied power input cable is dedicated only to this product. Do not use it with any other
product.
 When you use a power input cable other than the one supplied with the product, select a cable
which has an appropriate diameter in consideration of the safety standards and consumption
current. Use a protective grounding conductor of which diameter is the same or greater than
the power input cable.
Table 2-5 Maximum Input Power/Current and Power Input Cable
Rated
output
Maximum
Input
Power
Maximum
Input Current
Supplied power input cable
Power
Input
90 V
Power
Input
170 V
For both 100 V and 200 V series
(Power Input 90 V or More)
Only for 200 V Series
(Power Input 170 V or More)
3 kVA 4.50 kVA 50 A 26 A 14 mm
2
approx. 5.5 mm
2
approx.

Power source connection procedure
Check the current capacity of the single-phase distribution board before wiring. The wiring must be
performed by a professional engineer.

Before connecting this product to the power source, be sure to cut the power to the distribution
board. Otherwise, an electric shock might occur.
WARNING