background image

LINE

1

LINE

2

LINE

3

AMP

L2

N

G

L1

L3

AMP

L2

N

G

L1

L3

AMP

L2

N

G

L1

L3

MODEL NO.

DESCRIPTION

    HOT WIRE CODE                              COLOR

98665-1

LINE 1 DUPLEX     “L-1” (APPLICATION CIRCUIT)       RED WIRE

98665-2

LINE 2 DUPLEX     “L-2” (LIGHTING CIRCUIT)              BLACK WIRE

98665-3

LINE 3 DUPLEX      “L-3” (E.I.P CIRCUIT)                       BLUE WIRE

4 OR 5 WIRE
4 OR 5 WIRE
5-WIRE

POWERWAY SYSTEM

WIRING INFORMATION

Steelcase, Inc.

Grand Rapids, MI 49501
U.S.A.
1-800-227-2960

Tools

Assembly Directions

Printed In U.S.A.

REV

93-9501147   -   

Page 1 of 4

Installation For 4 & 5 Wire Duplex Receptacle Into:

Series 9000

®

 Structural Panel

2” P-Series Mobiles Power Panel
Series 9000

®

 Energy Management Worksurface

All electrical installations should be done by a 

qualified person in accordance with codes and 

regulations applicable at the installation site.

NO CONTACT

NO CONTACT

NO CONTACT

Summary of Contents for 98665-1

Page 1: ... 5 WIRE POWERWAY SYSTEM WIRING INFORMATION Steelcase Inc Grand Rapids MI 49501 U S A 1 800 227 2960 Tools Assembly Directions Printed In U S A REV 93 9501147 Page 1 of 4 Installation For 4 5 Wire Duplex Receptacle Into Series 9000 Structural Panel 2 P Series Mobiles Power Panel Series 9000 Energy Management Worksurface All electrical installations should be done by a qualified person in accordance...

Page 2: ...n duplex receptacle to panel powerway assembly Secure receptacle with 2 screws 2 STRUCTURAL PANEL POWERWAY SCREWS DUPLEX RECEPTACLE Remove access cover from base trim 3 ACCESS COVER BASE TRIM Replace trim by reversing removal procedure NOTE If receptacle and base trim do not align the powerway may be adjusted by loosening the 2 powerway mounting screws and sliding the power way to either end Re ti...

Page 3: ...receptacle to panel powerway assembly Secure receptacle with 2 screws 2 Remove access cover from base trim 3 Replace trim by reversing removal procedure NOTE If receptacle and base trim do not align the powerway may be adjusted by loosening the 2 powerway mounting screws and sliding the power way to either end Re tighten screws and replace base trim 4 BASE TRIM PANEL ASSEMBLY LINE 1 SCREWS DUPLEX ...

Page 4: ...eries 9000 Energy Management Worksurface Open worksurface channel cover and push receptacle onto powerway connector at right end of powerway Secure with 2 screws and close worksurface channel cover POWERWAY DUPLEX RECEPTACLE WORKSURFACE CHANNEL COVER ...

Reviews: