Inkonova MD04001-00-1307 DRAFT, Manual

Page: 1 / 19

Power Distribution Board (PDB) DRAFT
Code No. MD04001-00-1307
2
Power Distribution Board
Power Distribution Board or PDB of Tilt Drone Racer has been specifically
designed to withstand high racing electrical requirements along with
voltage supply filtering. The first commercial version of Tilt PDB is
released with version 1.4. Following are the features of the PDB:-
1. 4 ESC terminals with 30A current rating can be used on the PDB.
2. Can withstand high current up to 120A on the battery terminals.
3. Voltage filtering circuitry for clean supply at different locations of
the racer drone. Uses LM2596 filter circuit design.
4. 3 access terminals for +12V voltage. A total of nine 12VDC supply
points are provided.
5. 3 access terminals for +5V voltage. A total of nine 5VDC supply
points are provided.
6. Clean access to ESC soldering pads and separate access to ESC
output motor soldering pads.
7. High current access drill pads for better current propagation
throughout the circuit.
8. Ground copper pour for low noise generation.
9. Clean design and enhanced appeal.