Motoman PX2750, Руководство пользователя

Страница: 88 / 611

4.1 Preparation
4-1
HW0480633
4 Handling and Installation
Read “MOTOMAN Setup Manual”thoroughly before handling and installing the MOTOMAN
system , and then carry out the operation safely observing the following precautions.
1) Signs indicating prohibitions such as, “The lighting of fires is prohibited”
2) Clean working place that is clearly defined and free of obstacles
3) Appointment of personnel in charge
4) Company working regulations for safe operation
4.1
Preparation
Before installing the MOTOMAN, do the following:
1) Confirm the installation layout and the dimensions of each device to ensure the
transportation route and the installation space.
2) Check if the transportation route can support the weight of each device. If neces-
sary, reinforce the route.
3) To lift the manipulator, use the appropriate machinary such as a forklift.
4.2
Receiving and Handling
1) When the package arrives, check the contents.
Are the items and quantities in accordance with your order sheet ?
Was any damage incurred during shipment ?
2) Use a forklift, a pallet truck to carry the manipulator. Take measures to prevent
the manipulator from falling down.
3) Some devices such as the controller are mounted on casters, so be careful when
handling them.
• Confirm that the manipulator and the XRC have the same order number.
Special care
must be taken when more than one manipulator is to be installed.
If the numbers do not match, manipulators may not perform as expected and cause injury
or damage.
CAUTION