Motoman PX2750, Руководство пользователя

Страница: 217 / 611

2.3 CPU Rack
2-7
"
Wiring WAGO Connector
CN04 on the control power supply unit (CPS-150F) is equipped with a connector produced by
WAGO. The “wiring tool for WAGO connector” is necessary to wire with WAGO connector.
Two wiring tools are provided with the XRC as supplied parts.
The wiring procedure is described as follows:
Control Power
ON/OFF
To turn on the XRC controller power, turn the main switch to the ON posi-
tion then turning on the control power supply. If the controller is not
located at the workplace, the control power supply can be turned ON and
OFF by input from external device. It is operated by the external switch
connected with CN 04 of control power supply unit as shown in the fol-
lowing figures. (CN04 is shortaged when shipment)
Connection to Control Power Supply Unit
GO
“Wiring WAGO Connector”
for wiring of CN04 connector.
Items Specifications
Switch
Control Power Supply Unit
(CPS-150F)
CN04
-1
-2
CN4:231-102/026-000 (WAGO)
*1