Mitsubishi Electric GT16, Руководство пользователя

Страница: 800 / 1306

34 - 8
34. CONNECTION TO OMRON TEMPERATURE CONTROLLER
34.5 Temperature Controller Side Setting
(2) Settings of data length, parity bit, stop bit, master/
slave device and echoback
34.5.4 Station NO. setting
Set each station number so that no station number
overlaps.
The station number can be set without regard to the cable
connection order. There is no problem even if station
numbers are not consecutive.
(1) Direct specification
When setting the device, specify the station number of
the temperature controller of which data is to be
changed.
(2) Indirect specification
When setting the device, indirectly specify the station
number of the temperature controller of which data is to
be changed using the 16-bit GOT internal data register
(GD10 to GD25).
When specifying the station No. from 100 to 115 on GT
Designer3, the value of GD10 to GD25 compatible to
the station No. specification will be the station No. of
the temperature controller.
(3) All station specification
Target station differs depending on write-in operation or
read-out operation.
• For write-in operation, all station will be a target.
• For read-out operation, only one station will be a
target.
Setting
item
Set value
Switch No.
4 5 6 7 8 9 0
Data bit
7bits OFF
8bits ON
Stop bit
2bits OFF
1bit ON
Parity
Even OFF OFF
Odd ON OFF
None OFF ON
Commun
ication
Type
RS232 RS422
OFF ON
RS-232 RS485
OFF OFF
Echo
back
Without OFF
With ON
ON
SW
Set these switches.
Model name Specification range
E5AN, E5EN, E5CN, E5GN 0 to 99
E5ZN 0 to 15
Specification
station NO.
Compatible
device
Setting range
100 GD10
0 to 99: For E5AN, E5EN, E5CN or E5GN
0 to 15: For E5ZN
For the setting other than the above, error
(dedicated device is out of range) will
occur.
101 GD11
102 GD12
103 GD13
104 GD14
105 GD15
106 GD16
107 GD17
108 GD18
109 GD19
110 GD20
111 GD21
112 GD22
113 GD23
114 GD24
115 GD25
GOT
Station
No.3 Station
No.7 Station
No.1 Station
No.15 Station
No.6
Examples of station number setting