Mitsubishi Electric GT16, Руководство пользователя

Страница: 129 / 1306

9. HANDLING OF POWER WIRING AND SWITCH
9.4 Switch Wiring
9 - 19
9
HANDLING OF PO
WER WI
RI
N
G
AND SWIT
CH
10
UTIL
ITY FUNC
TION
11
DI
SPLA
Y
A
N
D
OP
ERA
T
IO
N
SE
TTI
N
GS
12
COMMUNICA
TION
INTE
RF
A
C
E
SE
TT
IN
G
13
DE
BUG
14
S
E
LF CHECK
15
D
A
TA
CONTROL
16
IN
ST
ALLA
TI
ON OF
COREOS,
B
O
OT
OS A
ND
ST
ANDA
RD MONI
TO
R OS
9.4.10 LED settings of grip switch
Grip switches (DSW1, DSW2) contain green LED for checking operation.The grip switch LED coordinates with b6 of the
external input and output function/output information (read 1) and operates the LED ON/OFF display.

Allocation of device to control LED
The device to control LED is allocated by the drawing software. The external input and output function/output
information (read 1) set in [read device] of [system information function] in the [common settings] is allocated
to the LED control.
The LED control for the grip switch is allocated to b6 (7th bit from the lower) of the device allocated to the external
input and output function/output information. The LED is lit when the bit value is 1 and not
lit when the bit value is 0.
External input and output function/output information (read 1)
For example, when D100 is set in the read device of system information, the value in b6 of D101 is reflected to the LED lit/
not lit.
9.4.11 Keylock switch (2-position SW)
The keylock switch (2-position SW) is used with wiring to the input of PLC

Connection example
The following describes the connection example when the notch of the switch is set to the left.
Set the load up to 24VDC/1A (contact specification) for each contact.

Pin layout
b15 b14 b13 b12 b11 b10 b9 b8 b7 b6 b5 b4 b3 b2 b1 b0
Grip switch
Model name
Terminal No.
KSW-C KSW-1 KSW-2
Connector Conversion Box
Terminal block 2)
8
Terminal block 2)
9
Terminal block 2)
10
KSW-C
KSW-1
KSW-2
GT16 Handy
PLC
COM
X20
X21
8
9
10
Notch of
the switch is
set to the left
Terminal
block 2)
Connector
conversion box