manualshive.com logo in svg

Mitsubishi Electric GT16, Руководство пользователя

FEISHEN GT16 - мощный гоночный квадроцикл с высокой производительностью. Предлагает безопасную и увлекательную езду. Для управления и ухода за ним, скачайте бесплатное руководство по эксплуатации с manualshive.com. Получите максимальное удовольствие от своего квадроцикла с помощью подробного руководства по эксплуатации.

Поделиться
Скачать
background image

3. SPECIFICATIONS

3.2 Performance Specifications

3 - 3

1

OV

ER

VI

EW

2

SY

STEM 

CONFIGURA

TION

3

SP

ECI

F

IC

A

T

IO

NS

4

PA

R

T

S

 N

A

M

E

5

UL, c

U

L 

S

TANDARDS

 A

N

D 

E

MC

 DIRECTIVE

6

OP

TIO

N

7

INST

ALL

A

TI

ON

8

COMMUNICA

TION 

CABLE

*1

Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel due to its characteristics. It is impossible 
to completely avoid this symptom, as the liquid crystal display comprises of a great number of display elements. Flickers may be 
observed depending on the display color.
Please note that these dots appear due to its characteristic and are not caused by product defect.
Flickers and partial discoloration may be generated on the liquid crystal display panel due to the display contents or the contrast 
adjustment. However, please note that these phenomena appear due to its characteristic and are not caused by product defect.
There is a difference in the display brightness and the color tones between liquid crystal display panels. When using multiple 
liquid crystal display panels, please note that there is an individual difference between them.
A crosstalk (shadow as an extension of the display) may appear on the liquid crystal display panel. Please note hat it appears due 
to its characteristic.
When the display section is seen from the outside of the display angle, the display color seems like it has changed. Please note 
that it is due to its characteristic.
Please note that the response time, brightness and color of the liquid crystal display panel may vary depending on the usage 
environmental temperature.
When the same screen is displayed for a long time, an incidental color or partial discoloration is generated on the screen due to 
heat damage, and it may not disappear.
To prevent the heat damage, the screen saver function is effective.
For details on the screen saver function, refer to the following.

 

11.2 Display Settings

*2

Gradation inversion is a characteristic of liquid crystal displays. Please be forewarned that depending on the displayed color, the 
visualization may be difficult even within the described view angle.

*3

The GOT screen saving/backlight off function prevents images from becoming permanently etched on the display screen.

 

11.2 Display Settings

*4

The touch panel is analog resistive film-type. If you touch the panel simultaneously in 2 points or more, the switch that is located 
around the center of the touched point, if any, may operate. Do not touch the panel in 2 points or more simultaneously.

*5

ROM in which new data can be written without deleting the written data.

*6

Note that this does not guarantee all user’s operation environment. The protection is not applied when the interface environment 
protection cover or environment protection back cover is removed. In addition, the product may not be used in environments 
under exposition of oil or chemicals for a long period of time, or in environments filled with oil-mist.

*7

If the operating ambient temperature is other than 25

, the error may become large.

Built-in 
interface

RS-232
RS-422/485

RS-232, RS-422/485, 1ch each
Transmission speed: 115200/57600/38400/19200/9600/4800bps
Connector shape: Square 42 pins (Male)
Application: For communicating with a controller (Select either RS-232 or RS-422/485 when 
used)

Ethernet

Data transfer method: 100BASE-TX, 10BASE-T, 1ch
Connector shape: Square 42 pins (Male)
Application: For communicating with a controller, using the gateway function, or connecting a 
personal computer (Project data upload/download, OS installation)

USB

USB(Full Speed 12Mbps), Host, 1ch
Connector shape: TYPE-A
Application: Data transfer, data storage
USB(Full Speed 12Mbps), device 1ch
Connector shape: Mini-B
Application: For connecting a personal computer (Project data upload/download, OS 
installation, FA transparent function)

CF card

Compact flash slot 1ch
Connector shape: TYPE I
Application: Data transfer, data storage, GOT startup

Buzzer output

Single tone (tone length adjustable)

Protective structure

*6

IP65f
(valid when the external cable is connected, except for the connector conversion box side)

External dimensions
(Excluding projections such as the 
emergency stop switch)

201(7.91)(W)×230(9.06)(H)×97(3.82)(D)[mm](inch)

Weight

Approx. 1.2kg (GT16 Handy main unit only)

Compatible software package
(GT Designer3 version)

Version1.14Q or later

Item

Specifications

Содержание GT16



























































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для GT16

Quintex QV Series Operation Manual preview
QV Series
Бренд: Quintex Страницы: 54
NCR 7607 User Manual preview
7607
Бренд: NCR Страницы: 152
National Instruments SCXI-1327 Installation Manual preview
SCXI-1327
Бренд: National Instruments Страницы: 15
Bosslan BOSSTX2B User Manual preview
BOSSTX2B
Бренд: Bosslan Страницы: 87
Fiserv First Data A920 Quick Reference Manual preview
First Data A920
Бренд: Fiserv Страницы: 6
Datavan S-615L User Manual preview
S-615L
Бренд: Datavan Страницы: 49
Heartland WaveReader G6 Mounting Manual preview
WaveReader G6
Бренд: Heartland Страницы: 7
Heartland WaveController Linking/Deleting Instructions preview
WaveController
Бренд: Heartland Страницы: 13
EMS Ingenico Desk/5000 Manual preview
Ingenico Desk/5000
Бренд: EMS Страницы: 2
JAO TECH Zivo User Manual preview
Zivo
Бренд: JAO TECH Страницы: 44
Ingenico group AXIUM DX8000-BASE-W2 User Manual preview
AXIUM DX8000-BASE-W2
Бренд: Ingenico group Страницы: 19
Doosan LIN-Q DTM-01 User Manual preview
LIN-Q DTM-01
Бренд: Doosan Страницы: 30
Mpaio F-1020 Manual preview
F-1020
Бренд: Mpaio Страницы: 17
UTC RETAIL 2250 User Manual preview
2250
Бренд: UTC RETAIL Страницы: 12
Tailwind FlexiPole Contour Quick Installation Manual preview
FlexiPole Contour
Бренд: Tailwind Страницы: 2
Bachmann IPC312 Operating Instructions Manual preview
IPC312
Бренд: Bachmann Страницы: 48
SIX Payment Services Worldline YOMANI TOUCH XR AUTONOM User Manual preview
Worldline YOMANI TOUCH XR AUTONOM
Бренд: SIX Payment Services Страницы: 22
ZKTeco Green Label ProCapture-T Installation Manual preview
Green Label ProCapture-T
Бренд: ZKTeco Страницы: 19

Бренды по названию

Популярные бренды

Загрузить еще бренды