Mitsubishi Electric GT16, Руководство пользователя

Страница: 1024 / 1306

51 - 14
51. CONNECTION TO YOKOGAWA TEMPERATURE CONTROLLER
51.5 Temperature Controller Side Setting
(2) Communication mode settings
Make this setting by operating the communication
mode select DIP SW.
(3) A setting of the station No.
Make this setting by operating the station No. select
Rotary switch.
51.5.4 Connecting to UTAdvanced
Series

Communication settings
Make the communication settings by operating the key of the
temperature controller.
*1 Adjust the settings with GOT settings.
*2 Avoid duplication of the address with any of the other units.
51.5.5 Connecting to converter (ML2-
[ ])

Communication settings
Make the communication settings using setting switches.
*1 Adjust the settings with GOT settings.
*2 Refer to the following connection diagram for setting.
51.3.2 RS-485 cable

Settings by switch
(1) Settings of the setting (2-wire/4-wire), the RS-485 driver-
active control, the terminating resistor, the echo back
Make those settings by operating the communication setting
DIP SW.
(2) A setting of the transmission speed
Make this setting by operating the timer change-over
time Rotary switch.
Switch position Communication mode
ON PC link communication mode
Switch position Station No.
0 1
1 2
2 3
3 4
4 5
5 6
6 7
7 8
8 9
9 10
A 11
B 12
C 13
D 14
E 15
F 16
Item Set value
Transmission speed
*1
9600bps, 19200bps, 38400bps
Data bit
*1
7bits, 8bits
Parity bit
*1
Even, odd, none
Stop bit
*1
1bit, 2bits
Address
*1*2
1 to 99
Minimum response time
0 to 10 ( 10ms)
Protocol selection
*1
PCL(0): PC link communication (without
sum check)
PCLSM(1): PC link communication (with
sum check)
ON
OFF
Item Set value
Transmission speed
*1
9600bps, 19200bps, 38400bps
Setting (2-wire/4-wire)
*2
2-wire type or 4-wire type
Terminating resistor
*2
With, Without
Echo back OFF
RS-485 driver-active control AUTO
Setting item
Set
value
Switch position
1 2 3 4 5 6
Setting(2-wire/4-wire)
4-wire
type
OFF OFF
-
2-wire
type
ON ON
RS-485 driver-active control AUTO OFF
Terminating resistor
with ON
without OFF
Echo back OFF OFF
Switch position Transmission speed
5 9600bps
6 19200bps
7 38400bps
Timer change-over time
Rotary switch
Communication setting
DIP SW