Mitsubishi Electric GT16, Руководство пользователя

Страница: 1296 / 1306

65 - 2
65. VNC(R) SERVER CONNECTION
65.3 GOT Side Settings
*3 A length between a hub and a node.
The maximum distance differs depending on the Ethernet device to be used.
The following shows the number of the connectable nodes when a repeater hub is used.
• 10BASE-T: Max. 4 nodes for a cascade connection (500m)
• 100BASE-TX: Max. 2 nodes for a cascade connection (205m)
When switching hubs are used, the cascade connection between the switching hubs has no logical limit for the number of
cascades.
For the limit, contact the switching hub manufacturer.
*4 When using GT16H-CNB-37S, the connection between GOT and a PLC can respond only Ethernet connection.
HINT HINT HINT
System configuration between the GOT and PLC
For the system configuration between the GOT and PLC, refer to each chapter.
Mitsubishi Products
Non-Mitsubishi Products 1, Non-Mitsubishi Products 2
Microcomputer, MODBUS Products, Peripherals
65.3 GOT Side Settings
65.3.1 VNC(R) server function setting
1.
Select [Common] [Peripheral Setting] [VNC
Server] from the menu.
2.
Check the [VNC Server] of [Use VNC Server] to set.
For details on the settings, refer to the following
manual.
GT Designer3 Version1 Screen Design Manual
(Functions)
3.
Click the [OK] button when settings are completed.
65.3.2 Setting communication interface
(Communication settings)
For using the VNC
®
server, Ethernet
communication drivers must be set on the GOT,
and set the Communication settings.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set Manufacturer, Controller Type, I/F, and Driver
according to the connected equipment to be used.
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
Click the [OK] button when settings are completed.
Click!
2.
2.
3.
4.
Click!