Mitsubishi Electric GT16, Руководство пользователя

Страница: 500 / 1306

21 - 12
21. COMPUTER LINK CONNECTION
21.4 GOT Side Settings
21.4 GOT Side Settings
21.4.1 Setting communication interface
(Communication settings)
Set the channel of the connected equipment.
1.
Select [Common] [Controller Setting] from the menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: Mitsubishi
• Controller Type: Set according to the Controller Type
to be connected.
• I/F: Interface to be used
• Driver: Set either of the following option according to
the Controller Type to be connected.
• Serial (MELSEC)
• AJ71QC24, MELDAS C6*
• AJ71C24/UC24
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage environment.
21.4.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
17.1.2 I/F communication setting
21.4.2 Communication detail settings
Make the settings according to the usage environment.
(1) Serial (MELSEC)
*1 This is effective when collecting a large data on other than
the monitor screen (logging, recipe function, etc.).
However, the range may affect the sequence scan time
when connecting to Q00UJ/Q00U/Q01U/Q02UCPU or Q00J/
Q00/Q01CPU.
If you want to avoid the influence on the sequence scan time,
do not set [High].
(This setting hardly affects QCPUs other than the above.)
*2 Set this range if you want to avoid the influence on the
sequence scan time further than the [Normal] setting when
connecting to Q00UJ/Q00U/Q01U/Q02UCPU or Q00J/Q00/
Q01CPU.
However, the monitor speed may be reduced.
POINT POINT POINT
Setting [Format]
This setting is required for replacement of F900 series
with GOT1000 series.
(1) To change the communication settings of the
serial communication module which is connected
to F900, set as follows.
The value of Transmission Speed can be set to
115200bps.
• [Intelligent function module switch setting] of
PLC
2.
3.
4.
Click!
Item Description Range
Transmission
Speed
Set this item when change the transmission
speed used for communication with the
connected equipment.
(Default: 115200bps)
When the setting exceeds the limit of the
connected equipment, communication is
performed at the fastest transmission
speed supported by the connected
equipment.
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
Retry
Set the number of retries to be performed
when a communication error occurs.
(Default: 0time)
0 to 5times
Timeout Time
Set the time period for a communication to
time out.
(Default: 3sec)
3 to 30sec
Delay Time
Set this item to adjust the transmission
timing of the communication request from
the GOT.
(Default: 0ms)
0 to
300(ms)
Format
Select the communication format.
(Default: 1)
1,2
Monitor
Speed
Set the monitor speed of the GOT.
This setting is not valid in all systems.
(Default: Normal)
High
*1
Normal
Low
*2
Switch No. CH1 side CH2 side
Switch 1 0000
H
-
Switch 2 0000
H
-
Switch 3 - 0000
H
Switch 4 - 0000
H
Switch 5 0000
H
0000
H