Mitsubishi Electric GT16, Руководство пользователя

Страница: 1022 / 1306

51 - 12
51. CONNECTION TO YOKOGAWA TEMPERATURE CONTROLLER
51.4 GOT Side Settings
51.4 GOT Side Settings
51.4.1 Setting communication
interface (Communication
settings)
Set the channel of the connected equipment.
1.
Select [Common] [Controller Setting] from the
menu.
2.
The Controller Setting window is displayed. Select the
channel to be used from the list menu.
3.
Set the following items.
• Manufacturer: YOKOGAWA
• Controller Type: YOKOGAWA GREEN/UT100/
UT2000/UTAdvanced
• I/F: Interface to be used
• Driver: YOKOGAWA GREEN/UT100/UT2000/
UTAdvanced
4.
The detailed setting is displayed after Manufacturer,
Controller Type, I/F, and Driver are set.
Make the settings according to the usage
environment.
51.4.2 Communication detail settings
Click the [OK] button when settings are completed.
POINT POINT POINT
The settings of connecting equipment can be
confirmed in [I/F Communication Setting].
For details, refer to the following.
17.1.2 I/F communication setting
51.4.2 Communication detail settings
POINT POINT POINT
(1) Format
• When connecting to UT100 Series, specify the
format 1.
• When connecting to only GREEN/UT2000/
UTAdvanced Series, specifying the format 2 is
recommended.
(2) Communication interface setting by the Utility
The communication interface setting can be
changed on the Utility's [Communication setting]
after writing [Communication Settings] of project
data.
For details on the Utility, refer to the following.
12. COMMUNICATION INTERFACE SETTING
(COMMUNICATION SETTING)
(3) Precedence in communication settings
When settings are made by GT Designer3 or the
Utility, the latest setting is effective.
2.
3.
4.
Click!
Item Description Range
Transmission
Speed
Set this item when change the
transmission speed used for
communication with the connected
equipment.
(Default: 9600bps)
4800bps,
9600bps,
19200bps,
38400bps,
57600bps,
115200bps
Data Bit
Set this item when change the data length
used for communication with the
connected equipment.
(Default: 8bits)
7bits/8bits
Stop Bit
Specify the stop bit length for
communications.
(Default: 1bit)
1bit/2bits
Parity
Specify whether or not to perform a parity
check, and how it is performed during
communication.
(Default: Even)
None
Even
Odd
Sum Check
Set whether or not to perform a sum
check during communication.
(Default: No)
Done, None
Retry
Set the number of retries to be performed
when a communication error occurs.
(Default: 0time)
0 to 5times
Timeout Time
Set the time period for a communication to
time out. (Default: 3sec)
3 to 30sec
Host Address
Specify the host address (station No. of
the GOT to which the temperature
controller is connected) in the connected
network.
(Default: 1)
1 to 99
Delay Time
Set this item to adjust the transmission
timing of the communication request from
the GOT. (Default: 5ms)
0 to 300ms
Format
Select the communication format.
(Default: 1)
Format 1:
Accessible to GREEN/UT100/UT2000/
UTAdvanced Series
Format 2:
Accessible to GREEN/UT2000/
UTAdvanced Series, Not accessible to
UT100 Series.
1/2