Mitsubishi Electric FR-A800, Инструкция по эксплуатации

Страница: 241 / 1042

Parameters Control method
FR-A800 5 - 61
I/O signal operation during the test operation
During the test operation, the following signals are invalid:
●
Input terminal function selection (Pr. 178 to Pr. 189)
– Brake opening completion signal (BRI)
– Load pattern selection forward/reverse rotation boost (X17)
– V/F switchover (X18)
– Orientation command (X22)
– Control mode switchover (MC)
– Start-time tuning start external input (X28)
– Torque bias selection 1, Torque bias selection 2 (X42, X43)
– Second brake sequence open completion (BRI2)
– Torque limit selection (X93)
●
Output terminal function selection (Pr. 190 to Pr. 196)
– Electronic thermal O/L relay pre-alarm (THP)
– Brake opening request (BOF)
– Second brake opening request (BOF2)
– Orientation complete (ORA)
– Orientation fault (ORM)
– Regenerative status output (Y32)
– In-position (Y36)
– Travel completed (MEND)
– Start time tuning completion (Y39)
– Home position return failure (ZA)
– Position detection level (FP)
– During position command operation (PBSY)
– Home position return completed (ZP)
Parameters referred to
Pr. 178 to Pr. 189 (input terminal function selection) => page 5-422
Pr. 190 to Pr. 196 (output terminal function selection) => page 5-361