English
A. Hardware connection:
Turn on the projector.
1.
Attach the Acer WPG. Use the
DVI-to-VGA converter if needed.
Plug one end of the audio cable into
your projector’s audio-in jack, and the
other end into the Acer WPG’s audio
jack.
Check the power LED on the left side of
the WPG.
If the LED is off, please plug one end
of the DC-to-DC cable into the power
jack and the other into the projector’s
5V DC-out jack (if fitted), or use the 5V
power adapter to supply power.
Once the power is connected, the power
LED should turn red.
3.
After a short time, the WPG’s default
screen will be projected, showing brief
software installation instructions.
4.
2.
Acer WP100
Quick Guide