Mitsubishi Electric FR-A800, Инструкция по эксплуатации

Страница: 392 / 1042

(E) Environment setting parameters Parameters
5 - 212
Automatic parameter setting (Pr. 999)
Select which parameters to automatically set from the table below, and set them in Pr. 999. Multiple
parameter settings are changed automatically. Refer to page 5-214 for the list of parameters that are
changed automatically.
Pr. 999
Setting
Description
Operation in the automatic parameter setting
mode
1 Sets the standard monitor indicator setting of PID control.
(AUTO)
→
(PID)
→
Write "1"
2 Automatically sets the monitor indicator for PID control.
(AUTO)
→
(PID)
→
Write "2"
10
Automatically sets the communication parameters for the
GOT connection with a PU connector ("Controller Type" in
GOT: FREQROL 500/700/800, SENSORLESS SERVO)
(AUTO)
→
(GOT)
→
Write "1"
11
Automatically sets the communication parameters for the
GOT connection with RS-485 terminals ("Controller Type"
in GOT: FREQROL 500/700/800, SENSORLESS SERVO)
—
12
Automatically sets the communication parameters for the
GOT connection with a PU connector ("Controller Type" in
GOT: FREQROL 800(Automatic Negotiation))
(AUTO)
→
(GOT)
→
Write "2"
13
Automatically sets the communication parameters for the
GOT connection with RS-485 terminals ("Controller Type"
in GOT: FREQROL 800(Automatic Negotiation))
—
20
50 Hz rated
frequency
Sets the related parameters of the
rated frequency according to the
power supply frequency (AUTO)
→
(F50)
→
Write "1"
21
60 Hz rated
frequency
—
Tab. 5-79: Automatic parameter setting
NOTE If the automatic setting is performed with Pr. 999 or the automatic parameter setting mode, the
settings including the changed parameter settings (changed from the initial setting) will be auto-
matically changed. Before performing the automatic setting, confirm that changing the parame-
ters will not cause any problem.