Mitsubishi Electric FR-A800, Инструкция по эксплуатации

Страница: 350 / 1042

Position control under vector control and PM sensorless vector control Parameters
5 - 170
5.5.5 Position control by inverter pulse train input
The simple position pulse train command can be input by pulse train input and sign signal (NP) to the
JOG terminal.
Operation outline
If the Pre-excitation/servo ON (LX) signal is turned ON, output shutoff is canceled and the Position
control preparation ready (RDY) signal is turned ON after 0.1 s. When STF (forward stroke end signal)
or STR (reverse stroke end signal) is turned ON, the motor rotates according to the command pulse.
When the forward (reverse) stroke end signal is turned OFF, the motor does not rotate in the corre-
sponding direction.
Pr. Name
Initial
value
Setting
range
Description
419
B000
Position command source
selection
0
0
Simple position control by point tables (position
command by setting parameters).
2 Simple pulse train command by inverter pulse input.
428
B009
Command pulse selection 0
0 to 2
Pulse train + rotation
direction sign
Negative logic
3 to 5 Positive logic
429
B010
Clear signal selection 1
0
The deviation counter is cleared at the edge when the
clear (CLR) signal is switched from OFF to ON.
1
The deviation counter is cleared while the clear (CLR)
signal is turned ON.
I001538E
Fig. 5-68: Operation
Vector Vector Vector PM PM PM
Forward rotation
Reverse rotation
Actual rotation
Base signal
0.1s
Servo on (LX)
Forward stroke end (STF)
Reverse stroke end (STR)
Operation ready completion (RDY)
Inverter pulse train command
Sign signal (NP)
In-position (Y36)