— 016 StSrnG
Standstill range
— 017 TArtIM
Timeout for taring/zero-setting
— 018 ZESrnG
Zeroset range
— 019 ZEtrnG
Zerotrack range
— 020 ZEtStP
Zerotrack interval
— 021 ZEttIM
Zerotrack time
— 022 oVrLd
Overload
— 023 MIn
Min.
— 024 MuLrnG
Multi-range mode
— 025 rAnG 1
Range 1
— 026 rAnG 2
Range 2
— LI
Limits (settings via VNC), for Standard
application only
— 030 LIM.1on, LIM.1oF
Limit 1 "On", limit 1 "Off"
— 031 LIM.2on, LIM.2oF
Limit 2 "On", limit 2 "Off"
— 032 LIM.3on, LIM.3oF
Limit 3 "On", limit 3 "Off"
— LA
Limits, action/condition (settings via VNC), for
Standard application only
— 033 LIM.1on
Action/condition
— 034 LIM.1oF
Action/condition
— 035 LIM.2on
Action/condition
— 036 LIM.2oF
Action/condition
— 037 LIM.3on
Action/condition
— 038 LIM.3oF
Action/condition
— do
Digital outputs (settings via VNC), for Standard
application only
— 040 bCd.out
BCD mode: GroSS; NEtIt = net if tared,
otherwise gross; SELECt; trnSP
— 041 outP. 1
Output 1
— 042 outP. 2
Output 2
— 043 outP. 3
Output 3
— dI
Digital inputs (settings via VNC), for Standard
application only
— 044 InP.1on
Input 1, condition
— 045 InP.1oF
Input 1, condition
— 046 InP.2on
Input 2, condition
— 047 InP.2oF
Input 2, condition
— 048 InP.3on
Input 3, condition
— 049 InP.3oF
Input 3, condition
— Ao
Analog output, for Standard application only
— 050 AnA.Mod
Mode: GroSS; NEtIt = net if tared, otherwise
gross; SELECt; trnSP
— 051 AnA.rnG
Range 0/4–20 mA
— 052 out.Err
Output on error
— 053 out.< 0
Output if <0
— 054 out.>20
Output if >Max
— 055 WGt.0/4
Weight if 0/4 mA
— 056 WGt. 20
Weight if 20 mA
— oP
Operating parameters
— 060 Addr
Device address, for Standard application only
X3 Process Indicator PR 5410
7 Commissioning
Minebea Intec
EN-124
