Register 15
Reserved (free)
Register 16
Print gross weight/write to Alibi memory
Register 17
Print net weight/write to Alibi memory
Register 18
Print tare weight/write to Alibi memory
Register 19
Print sequence number/write to Alibi memory
Register 20
Output value (BCD format)
Register 21
Print date/write to Alibi memory (BCD format)
Register 22
Print time/write to Alibi memory (BCD format)
12.2.6.10
Registers 24…29: Limits(Read/Write)
Register 24
Limit 1 on
Register 25
Limit 1 off
Register 26
Limit 2 on
Register 27
Limit 2 off
Register 28
Limit 3 on
Register 29
Limit 3 off
12.2.6.11
Registers 30, 31: Fixed values (Read/Write)
Register 30
Fixed value for analog output; value (num) 0
20000 corresponds to
20 mA
Register 31
Fixed value for preset tare, see also
SetFixTare
,
GetFixTare
in Chap-
ter
.
12.2.6.12
Registers 80…92: State-controlled action bits (Write)
Note:
For setting bits, see Chapter
.
Only setting and resetting of single bits is possible.
When changing a bit from 0 to 1, the corresponding action starts. After handling the
command, the bit must be reset. Application: The master writes cyclically.
The bit is set as
Write_Value_Select
with the specified number (see Chapter
).
The bit is reset at the specified 128.
Register 80
SetZero
Set the gross weight to zero.
Register 81
SetTare
Execute taring.
Register 82
ResetTare
Reset tare.
Register 83
SetTest
Start the ADC test.
Register 84
ResetTest
Finish the ADC test.
X3 Process Indicator PR 5410
12 Fieldbus interface
Minebea Intec
EN-304
