OmegaPATPlus / BetaPATPlus Instrument description
8
2 Instrument description
2.1 Front
panel
Front panel
Legend:
1..............Mains switch with indication lamp.
2..............Two T16 A / 250 V fuses for instrument protection.
3..............Mains supply cord.
4..............240
×
128 dots graphic matrix display with backlight.
5..............LN and PE sockets for testing the insulation resistance and substitute leakage
current of fixed installed appliances.
Warning! These sockets are intended only for the connection of
deenergized appliances.
6..............Flash test socket
7..............PRCD socket for testing portable residual current devices
Warning! This socket is intended only for connection of portable RCDs.
8..............IEC appliance connector for testing supply cords.
Warning! The connector input is only for testing purposes; do not
connect it to mains supply!
9..............Test probe (earth bond) connector, also used as an input in some class 2
measurements:
insulation resistance, substitute and touch leakage currents (reffered to as
socket S)
10............Test socket (115 V),
Warning! Dangerous voltage is present on the test socket during the
measurement. Maximum output current is 16 A, test only appliances
with maximum rated supply current not higher than 16 A!
11............Test socket (230 V).
Warning! Dangerous voltage is present on the test socket during the
measurement. Maximum output current is 16 A, test only appliances
with maximum rated supply current not higher than 16 A!
12............Cursor keys and ENTER key.
