OmegaPATPlus / BetaPATPlus
Working with autotest results
60
8 Working with autotest results
After the autotest sequence is completed, measurement results can be:
Ì
viewed,
Ì
saved to the flash memory of the instrument,
Ì
send to PC,
Ì
test report can be printed out to serial printer,
Ì
appliance label can be printed out.
8.1 Saving autotest results
After the autotest sequence is completed, the
Save results
menu is displayed.
Aus/NZ model
UK model
Save results menu
In this menu all important data can be added to the autotest results. In the instrument,
the following data can be set before saving the autotest results:
UK model
Aus / NZ model
Ì
appliance number and its name,
Ì
test site and location,
Ì
retest
period,
Ì
repairing
code,
Ì
comments.
Ì
appliance number and its name,
Ì
site, building and room,
Ì
retest
period,
Ì
make,
Ì
comments,
Ì
model,
Ì
serial number.
By using
¿
and
À
cursor keys select parameter you want to edit.
Aus/NZ model
In the
Appliance no.
field, up to 10 alpha-numeric or special characters can be entered.
The
Appliance number
can also be scanned with a barcode reader.
In the
Site
,
Building
,
Room
and
Appliance name
fields, up to 15 alpha-numeric or
special characters can be entered. The
Building
,
Room
and
Appliance name
parameters can also be selected from the list of 100 predefined names for each
parameter.
In
Retest period
field, at the most 2 numeric characters can be entered to represent the
number of months between retest.
In the
Comments
,
Make
,
Model
and
Serial number
fields, up to 25 alpha-numeric or
special characters can be entered.
