OmegaPATPlus / BetaPATPlus
Autotest sequences
52
Aus / NZ model
UK model
Project autotests main menu
When searching for stored autotest results the following filters can be used to narrow
the hits:
UK model
Aus / NZ model
Ì
appliance
number,
Ì
test
site,
Ì
location
Ì
date from and date to,
Ì
user.
Ì
appliance
number,
Ì
building
Ì
room,
Ì
date from and date to,
Ì
user.
By using
¿
and
À
cursor keys select the filter you want to edit.
To change the selected parameter line type, press the F3 function key and the
»parameter type« will become highlited (e.g. APPLIANCE). The
½
and
¾
cursor keys
can then be used to change the parameter type and by pressing ENTER key the choice
can be confirmed. Once the parameter types have been set up, the data required to
filter the files can be inserted. Filter information can be inserted via the alphanumeric
keypad or, in some filter fields such as user, can also be selected from a predefined list
by pressing the F4 function key. The appliance number field can also be read using a
barcode reader.
By placing a »*« (shift + “2”) in a particular field, tells the instrument not to search the
associated filter field. When searching, the instrument will therefore ignore data in this
parameter and go on to find all the appliances that conform to data placed in the other
filter fields.
To find all stored results, enter »*« in the all fields (excluding DATE where the correct
from and to dates must be entered).
When the search filters have been correctly set up, a search can be performed by
pressing the F1 function key. If the search filters are set up correctly and the appliances
exist in the units memory, the
Project autotests result
menu
will be displayed.
Aus/ NZ model
UK model
Project autotest result menu
