Mercury 2010 Milan Скачать руководство пользователя страница 36

Страница: 36 / 330

Sound Adjustments

Press SOUND repeatedly to cycle through the following features:

BASS:

Press

SEEK/TRACK

to adjust the level of bass.

TREBLE:

Press

SEEK/TRACK

to adjust the level of treble.

BALANCE:

Press

SEEK/TRACK

to adjust the audio between

the left (L) and right (R) speakers.

FADE:

Press

SEEK/TRACK

to adjust the audio between the

back (B) and front (F) speakers.

SPEED COMPENSATED VOLUME:

With this feature on, radio volume

automatically gets louder with increasing vehicle speed to compensate
for road and wind noise.

The default setting is

off.

Use

SEEK/TRACK

to adjust between SPEED OFF and levels

1–7:

Increasing the level from 1 (lowest setting) to 7 (highest setting)

allows the radio volume to automatically change slightly with vehicle
speed to compensate for road and wind noise.

Recommended level is

1–3;

SPEED OFF turns the feature off and level 7

is the maximum setting.

ALL SEATS (Occupancy mode, if equipped):

Press SOUND

repeatedly to reach the Occupancy mode setting. Press
SEEK/TRACK

to select and optimize sound for ALL SEATS,

DRIVERS SEAT or REAR SEATS.

Extra Features

AUX:

Press repeatedly to cycle through LINE IN (auxiliary audio mode),

and SYNC

威

(if equipped).

For location and further information on auxiliary audio mode, refer to

Auxiliary input jack

later in this chapter.

If your vehicle is equipped with SYNC

威

, please refer to the

SYNC

威

information included with your vehicle for further information.

OK:

Your vehicle may be equipped with special phone and media

features which will require you to confirm commands by pressing OK.
For further information, refer to the

SYNC

威

information included with

your vehicle for further information.

Entertainment Systems

2010 Milan

(mln)

Owners Guide, 3rd Printing
USA

(fus)

Содержание 2010 Milan











































































































































































































































































































































Результаты поиска

Содержание 2010 Milan

Отзывы:

Похожие инструкции для 2010 Milan

Бренды по названию

Популярные бренды

Mercury 2010 Milan, Руководство пользователя

Результаты поиска

Содержание 2010 Milan

Отзывы:

Похожие инструкции для 2010 Milan

Бренды по названию

Популярные бренды