Establishing IP connections
68
© MAYAH Communication GmbH
Configure the codec settings via menu item Settings/Codec:
· Encoder dependency: Local
· Decoder dependency: Remote
The audio quality of the multicast stream is determined by the encoder settings of
algorithm, sample rate, bit rate and mode of the Multicast sender.
1.2 Codec Settings of Multicast receiver
Configure the codec settings via menu item Settings/Codec:
· Encoder dependency: Remote
· Decoder dependency: Remote
1.3. Establish Connection (Multicast Sender and Receiver)
Click the CONNECT button to open the Connect-dialog:
· Select interface to IP
· Select RTP
· Type in the Multicast IP-address (e.g. 225.0.0.2)
Note:
A special port can be selected by the optional suffix ‘:<port number>’
(e.g. 225.0.0.2:5004)
· Click the OK-button to establish connection
2. Multicast RTP connection to other decoders
Old RTP protocol implementation is used provided system software <= 2.1.0.46.
2.1 Codec Settings of Multicast sender
Configure the codec settings via menu item Settings/Codec:
· Encoder dependency: Local
· Decoder dependency: Remote
The audio quality of the multicast stream is determined by the encoder settings of
algorithm, sample rate, bit rate and mode of the Multicast sender.
2.2. Establish Connection (Multicast Sender)
Click the CONNECT button to open the Connect-dialog:
· Select interface to IP
· Select RTP
· Type in the Multicast IP-address preceded with a ‘r’
Note:
Since system software version 2.1.0.47 no more ‘r’ is necessary
Note 2:
A special port can be selected by the optional suffix ‘:<port number>’
(e.g. r225.0.0.2:5004)
· Click the OK-button to establish connection
2.3 Establish Connection (other decoder)
