MAYAH Merk II, Руководство пользователя

Страница: 30 / 83

Individual Parameters
30
© MAYAH Communication GmbH
To set the encoder, proceed as follows:
(a) Via the front panel:
•
Select the SETUP option in the Start mask (see Figure 4 ). The Setup mask appears.
•
Select
AUDIO ENCODER
and press . The following mask appears:
Figure 21: The
ENCODER
mask
•
Select the parameter to be changed with the and keys and then press the
key. A list of all possible values appears.
•
Select the desired value with the and keys and then press the key.
•
Repeat this procedure if required for additional parameters.
•
End the setting by pressing the key.
(b) Via the remote control software:
•
Select
SETTINGS CODEC
. The following dialog window opens:
Figure 22: The
CODEC SETTINGS
dialog window
•
Select the desired value the individual encoder lines.
Note: The selection options for the decoder are explained in section “ Set Decoder ” .
•
To make the settings effective, click on ”OK”.