Table of Contents
Centauri user manual revision level 01 /2007
51
5.2.2.
Edit communication profiles
To edit a communication profile, proceed as follows:
(a) Via the front panel:
•
Select the
SETUP
option in the Start mask (see
Figure 4
). The Setup mask appears.
•
Select
EDIT PROFILE
and press
. A list appears that contains all the profiles from
which the profile to be edited can be found.
•
Select the communication profile to be edited and press
. Then the same mask
appears as in
Figure 53
.
•
Alter the desired setting values using the arrow keys.
•
Save the communications profile by pressing the key and acknowledge the device
query message with OK by pressing the
key.
(b) Via the remote control software:
•
Select
EXPERT
PROFILES
.
•
Enter the Super User password (see also section "Remote Control Software Superuser
Password "). A dialog window appears with the existing communication profiles.
•
Select the profile to be edited and double-click on the corresponding line or press on
the “E” key. This leads to another dialog window opening.
•
Alter the desired parameters in this window.
•
To save, click
OK
in both of the windows.
5.2.3.
Delete communication profile
Communication profiles can only be deleted when they are not used in any of the
phone book entries.
To delete a communication profile, proceed as follows:
(a) Via the front panel:
•
Select the
SETUP
option in the Start mask (see
Figure 4
). The Setup mask appears.
•
Select
DELETE PROFILE ENTRY
and press
. A list of all profiles appears.
•
Select the communication profile to be deleted and press
.
•
Respond to the security query with
OK
by pressing the
key.
(b) Via the remote control software:
•
Select
EXPERT
PROFILES
. Enter the Super User password. A dialog window with the
existing profiles and their parameters opens.
•
Select the profile to be deleted.
•
Click on
DEL
or press the “delete” key.
•
To delete, click
OK
.
