Individual Parameters
48
© MAYAH Communication GmbH
5.1.21. Switch Progress Display On/Off
If the main window of the remote control software contains the input focus, the encoder
and the decoder are usually requested. The progress of this check is displayed in a dialog
window. This progress display can be switched off.
To switch this display option on or off, proceed as follows:
•
Select
EXPERT
OPTIONS
in the remote control software
.
The following dialog window
opens:
Figure 53:
The
OPTIONS
dialog window
•
Click the control box next to “Enhanced Status Messages”, a tick in the control box
means “display on”, no tick means “display off”.
•
To make the setting effective, click on “OK”. Switch Disconnect Dialog On/Off
The remote control software gives you the option of ending
all
existing connections or also
just individual
connections with a “Disconnect”. The “Disconnect” always ends all existing
connections. To switch the selection on or off, proceed as follows:
•
Select
EXPERT
OPTIONS
in the remote control software
.
The following dialog window
opens:
Figure 54:
The
OPTIONS
dialog window
•
Click the control box next to “Enable Disconnect Dialog”, A tick in the control box
means “display on”, no tick means “display off”.
•
To make the setting effective, click on “OK”.
