Individual Parameters
46
© MAYAH Communication GmbH
5.1.18. Mixer Profiles
Here you can handle the profiles for the mixer settings. Mayah preset profiles can not be
changed or deleted.
This setting is only possible via the front panel, and not via the remote software:
(f) Via the front panel:
•
Select the
SETUP
option in the Start mask (see
Figure 4
). The Setup mask appears.
•
Select
Mixer Profiles
and press
. The
Mixer Profiles
mask appears.
Figure 50:
The
Mixer Profiles mask
•
Select the appropriate channel with the
and
keys and press
.
•
Select the desired parameters with the
and
keys and press
.
•
To end press the key.
5.1.19. Set Number Of COM Ports To Be Checked
After the program is started the remote control software automatically requests the set
number of MERK IIs connected to serial COM ports. In delivery condition only COM ports
1 and 2 are requested. The number of COM ports to be requested can however be
increased to up to 8. To change the number of COM ports to be requested, proceed as
follows:
•
Select
EXPERT
OPTIONS
in the remote control software
.
The following dialog window
opens:
Figure 51:
The
OPTIONS
dialog window
•
Click on the drop-down list next to “Max. Number Com Ports to Scan”, and select the
desired number.
•
To make the setting effective, click on “OK”.
