Table of Contents
Centauri user manual revision level 01 /2007
39
5.1.9.
Set Quantization Procedure for G.711
Depending on the country, it can be necessary to set quantization procedure G.711 for
ISDN telephony. This setting must be made when setting up operation and when the
procedure used is changed (e.g. when the location of the device is changed).
To set the quantization procedure, proceed as follows:
(a) Via the front panel:
•
Select the
SETUP
option in the Start mask (see
Figure 4
). The Setup mask appears.
•
Select
MISCELLANEOUS
and press
. The
MISC
mask appears.
Figure 37:
The
MISC
mask
•
Press
again.
•
Select the respective parameter for “G711” (“A LAW” for Europe, “µ LAW” for USA)
with the
and
keys and press the
key.
•
If necessary, set other parameters as desired in the same way (“G711 Level”,
“Dualmode” and “Subcodec”).
•
To end, press .
(b) Via the remote control software:
•
Select
SETTINGS
OTHERS
. The following dialog window opens:
Figure 38:
The
OTHER SETTINGS
dialog window
•
Select the appropriate parameter (“A LAW” for Europe, “µ LAW” for USA) under “G.711
law”
•
To make the new parameter effective, click on “OK”.
