Table of Contents
Centauri user manual revision level 01 /2007
59
6.5.
Indications
The Merk II is able to react to internal and external events.
There is more about this topic on
page 9
.
6.6.
Cut Connection
You can cut an existing connection at any time.
(a) Via the front panel:
In order to break off an existing connection, proceed as follows:
1)
Via the start mask
•
Select
CONNECT
in the start mask (see
Figure 4
) and press the
key.
•
Now select
DISCONNECT
and press the
key once again.
2)
Via the speed dial key
•
Press the
*) key. The
SPEED
DIAL
mask appears.
Figure 67:
The
SPEED
DIAL
mask
•
Select
DISCONNECT
and press the
key once again.
The connection is broken off immediately. All of the channels utilized by the connection
are closed, i.e. both B channels of a two-channel ISDN connection.
(b) Via the remote control software:
•
To cut an existing connection, click
DISCONNECT
in the program window. The connec-
tion is cut off immediately. All the channels belonging to a connection are closed, i.e. in
the case of a two-channel ISDN connection, both B channels.
Figure 68:
Disconnect dialog mask, if several connections exist
Note
: One separate connection can be displayed up to a maximum of 49.7 days (this
value depends on the type of cardinal variable in which it is stored, exactly 2
32
– 1 ms).
